• 1.jpg
  • 2.jpg
  • 3.jpg
  • 4.jpg

Computer-Aided Design  – definition and meaning

Computer-aided design or CAD refers to the use of computer software that supports the design process. The software helps us create, modify, analyze, and enhance a design. In other words, CAD is software that helps us design things.

Many people believe that computer-aided design refers just to drawings. In fact, it does not. CAD refers to any use of software to help in the design process.

CAD software replaces drafting by hand with an automated process. People working in architecture today have probably used 2-D or 3-D CAD programs. Those working in MEP or structural engineering have also probably used 2-D or 3-D CAD programs. MEP stands for mechanical, electrical and plumbing engineering

Computer Aided Design

Computer-aided design makes designers’ work easier by enabling them to create, modify, and optimize designs. MIT’s Impact Labs says: “Indeed with CAD, you can create anything! OK, maybe not quite, but you can do a whole lot. It provides you with visualization capabilities that make it worth every effort you put into learning it.” (Image: impactlabs.mit.edu)

Europe’s largest manufacturing and electronics company, Siemens, makes the following comment:

“Computer-aided design is the use of computer programs to create two- or three-dimensional graphical representations of physical objects.”

Computer-aided design multi-dimensional viewing

We can rotate the two- or three-dimensional diagrams. Therefore, we can view them from several different angles. In fact, we can see from the inside looking outward. Designers use a special plotter or printer for professional design renderings.


CAD Modeling.gif
By Nicola L.K. – Own workCC BY-SA 3.0Link


People use computer-aided design for circuit design. The software may use system blocks to identify which components you need. It can also lay out the circuit diagram.

People like CAD programs because they can change different design ideas rapidly and easily.

After designing something, we can build and test it virtually. In other words, we can determine whether it will work. Companies like this because it reduces the cost of modifying prototypes and purchasing parts. Therefore, they get more mileage out of each dollar they spend.

A growing number of professions are using computer-aided design programs. Examples include artists, drafters, engineers, and architects.

The concept of designing geometric shapes for objects – computer-aided geometric design (CAGD) – is very similar to CAD.

Computer aided design using Solid Edge

A rotary compressor, courtesy of the Ariel Corporation. Modeled and rendered in Solid Edge, a CAD program owned by Siemens. (Image: plm.automation.siemens.com)

Range of computer-aided design systems

Computer-aided design software today exists for all the major computer platforms. For example, they exist for Mac OS X, Unix, Windows, and Linux. The user interface typically centers around a mouse which we hold with our hand. Pens and digitizing graphic tablets are also available.

With some CAD systems, you can use stereoscopic glasses to view three-dimensional models.

According to Techopedia:

“Most U.S. universities no longer require classes for producing hand drawings using protractors and compasses. Instead, there are many classes and different types of CAD software.”

Computer-aided design benefits

– Better Visualization: of the finished product, sub-assemblies, and component parts of a CAD system significantly speeds up the design process.

– Better Accuracy: people who use CAD software work more accurately. In other words, they make fewer mistakes.

– Easier: CAD programs offer more robust and easier design documentation, including geometrics and dimensions, bills of materials, etc.

– Re-Use: the software offers easy re-use of best practices and design data.

Autodesk Inventor computer aided design

Autodesk Inventor, one of the top-ten CAD programs on the market today. It enables designers to create animations, snapshots and exploded videos with a timeline-based story panel to manage it all. (Image: autodesk.co.uk)

Types of computer-aided design

There are many kinds of CAD, covering a vast range of uses. However, in each case, the design of their virtual components requires a different approach.

At the lower end of the 2D systems, there are several free and open source systems. In other words, there are many freely-available programs which we may modify and redistribute.

These programs provide an approach to drawing without all the intricacies regarding scale and placement on the drawing sheet that hand drafting requires. During the creation of the final draft, the designer can make adjustments.

3D Wireframe

3D Wireframe is an extension of 2D drafting. The designer must manually insert each line into the drawing. The finished product has no mass properties associated with it. For example, it is not possible to add features, such as holes, directly to it.

The 3D Wireframe model is an edge or skeletal representation of a real-life object. Models consist of lines, points, arcs, circles, and other curves that define the center lines or edges of objects.

3D ‘Dumb’ Solids

With 3D ‘Dumb’ Solids, the designer creates things in a way similar to manipulations of real world objects. You can add cylinders, prisms, spheres, and other basic 3D geometric forms to the design. You can also take them away as if you were cutting or assembling real-world objects.

Designers can also generate 2D projected views from the models.

More upmarket systems offer capabilities to incorporate more ergonomic, aesthetic, and organic features into designs.

Product placement visualization through computer aided design

With a computer-aided design program, you can visualize where to place goods on the shelves of supermarkets and other stores. You can move them around and even look at them from different angles.

History of computer-aided design

Dr. Patrick J. Hanratty

CAD began in 1957 when Dr. Patrick J. Hanratty developed Pronto. Pronto was the world’s first commercial numerical-control programming system. In fact, designers today say that Dr. Hanratty was the ‘father of CAD/CAM.’

Ivan Sutherland

Ivan Sutherland, of MIT’s Lincoln Laboratory, designed the sketchpad in 1960. Sutherland demonstrated the basic principles and feasibility of technical drawing using a computer.

Initially, CAD systems were simply replacements of drawing boards. Design engineers still worked in two dimensions to create technical drawings.

Even so, with these early systems, it was easier to modify and revise one’s work. Initially, these systems were extremely expensive. Therefore, only large and rich companies had them.

However, over time, CAD software and hardware became more affordable for medium-sized firms. ‘Affordable’ means ‘within most consumers’ budgets.’ In this case, the consumers are firms.

3D wireframe features were developed in the 1960s. In 1969, Syntha Vision released Magi, the first commercially-available solid modeler program.

NURBS

The use of the mathematical model NURBS in computer graphics for generating and representing curves and surfaces emerged in 1989 on Silicon Graphics workstations. NURBS stands for Non-Uniform Rational Basis Spline.

CAS Berlin developed an interactive NURBS for personal computers – NöRBS – in 1993.

CADs based on parametric engines

In 1989, T-Flex introduced CADs based on parametric engines. With parametric modeling, parameters define the model.

If you change dimension values in one place, changes automatically occur in other dimensions. They change to preserve how all the elements in the design relate to one another.

MCAD (mechanical computer aided-design) systems introduced the concept of constraints that enable the designer to define relations between different components in the assembly.

Designers began to use a bottom-up approach. In other words, when parts are first created and then assembled.

CAD systems today

People use CAD systems extensively today. In fact, we use them across all industries.These systems once only worked in expensive workstations using UNIX operating systems. However, today they are available off-the-shelf for use in PCs, laptops, tablets, and smartphones.

Three-dimensional modeling is the norm today. In fact, it even exists in applications for the general public. Examples include three-dimensional buildings modeling in Google Maps, garden planning, and interior design.

For employees in many industries, CAD is an integral part of the work they do. In fact, some of them would not be able to function in our current business environment without CAD systems.

According to toptenreviews.com:

“Such ubiquity across a vast array of industries ensures the longevity and necessity of CAD software in today’s technology-driven world.”

The Ford Motor Company has started 3D-printing car parts from computer-aided designs.

 

 Learn Computer Aided Design in Abuja Nigeria

Your can learn computer Aided design such as AutoCAd, ArchiCAd, Revit, 3DS Max, and many other specialized CAD softwares in Abuja Nigeria. At Skilltouch Computer School, a standard Computer Aided Design Learning Center in  Abuja, we offer you an opportunity to have a one on one or personalized training with any of our professional instructors at a very affordable price.  

Follow the link below to enrol online or contact us through any of our phone lines or send us a mail. We shall be glad to guide you further.

 

 

See more of our computer & ICT training courses in Abuja Below>>

 

  
About Us 
 
Skilltouch Computers and Educational Services is a business enterprise located in Abuja, the Federal Capital Territory of Nigeria, with expertise and experience in providing ICT Solutions and Educational Services in Abuja and throughout  Nigeria.  Our ICT services includes, computer training in the FCT Abuja and throughout Nigeria, technical skill training, local and wide area computer networking, surveillance system setup and management, and alternative  energy solutions anywhere in Nigeria. 

 

>> Read More 

 

 

Computer Training School

computer school home page img

Skilltouch Computer training center  & ICT School in Abuja ranks among the best ICT institutions in the FCT, a trusted center for practical computer skills aquisition. 

Our facilities include adequate computers, standard lecture rooms , free internet access, steady power supply and a team of competent and professional ICT instructors.

The computer schools' performance has been excellent, making it a destination for people from within and outside Abuja who desire the best in Computer Education.

From our ICT training center in Wuse zone 5, Abuja, we have trained  over ten thousand students in different computer fields and still counting.

>> Read More  

 

 

Technical Skills Acquisition

computer school home page img 

 At Skilltouch Technical Skill acquisition center Abuja, we offer hands-on practical technical skill acquisition courses. Student learn how to install, maintain, troubleshoot and repair a wide range of hardware and devices which include Solar Panels, Inverters, CCTV Cameras, Drones, Fiber Optic Cable, Biometric and Access control machines, and many more. Students are exposed to practical projects through our ICT consultancy services which undertakes numerous projects in Abuja and accros Nigeria.

 >>Find Out More 

 

 

Skilltouch Academy, Abuja, Nigeria

 

computer school home page img

 

We own and operate full fledged schools and colleges in Abuja,  starting from Nursery to Secondary classes, our schools boast of standard facilities, experienced and qualified teaching / support staff and efficient curriculum delivery. It is located in Jikwoyi district of Abuja, the Federal Capital City of Nigeria, a serene and conducive environment, with ample space for sporting and recreational activities.

 

>> Read More 

 

 Pre - Versity College, FCT

computer school home page img

 This is a study center for students who are currently out of secondary school and want to sit for 'O'  or 'A' level exams in preparation for university admission. The classes are designed to prepare students for the following exams; UTME, SSCE, SAT, TOELF and Cambridge Exams. Students seeking direct entry into two hundred level in Nigerian Universities are also prepared for JUPEB and IJMB exams.

  

 >>Read More

 

 

Integrated Solutions

computer school home page img 

 We offer a wide range of ICT solutions and services, we integrate the latest technological advancement with every  aspect of human endeavours such as agriculture, education, entertainment, real eastate, security, finance, construction and many more. Our software and hardware solutions are designed to help derive maximum benefit from the use of technology by individuals and coporate organisations to enhance thier productivity.

>> Read More

  

Quick Links

Newsletter

Kindly subscribe for our newsletter to receive regular updates, news and information.
Name:
Email:

Our Address

 1. Skilltouch ICT Hub

 Ground Floor, Suite J1, Sky Memorial Shopping Complex, Wuse Zone 5, Abuja. 08027083275

2. Skilltouch Academy

 Behind Total Filling Station (Along JIkwoyi - Kpeygi Road), Angwangede, Jikwoyi, Abuja. 07037149353